DIY Bar Cart! From Mid-Century Modern table to Mad Men-tastic bar cart

I love the look of those two tier mid-century side tables, however they are too low to function with modern furniture. So, I choose to remake one into a bar cart because I love the idea of the two levels, one for storage of bar items and one for glasses and mixing. And since you know how much I was in love with the Russian Figure ladies skater's costume as evident of my post on inspiring images in that color palette, I choose to use dark grey and bronze.


The key to the table is getting the right height and scale. The mixing surface was moved up to 26 inch high and the storage is about 34 inches high. This cart is styled for mixing alcoholic drinks, but would be super cute as a coffee bar, tea cart, or even as a small desk! I plan to use it for coffee.


This is a simple project of cutting off the legs, adding a little lumber, and a nice paint job. The nice paint job includes using a pattern. I have included the pattern at the bottom. You can enlarge it to the size you need! The instructions can be printed with the title of the project at the top.










SUPPLIES:
For this project you will need the following supplies to complete a table similar this one.

BASICS:
A table to alter- if using a table like this pick your cutting zone carefully and with consideration to the size of your lumber! I chose a spot that was not tapered to make adding the legs back easier.
lumber- I used 2"x 2" which is nominal measurement of 1.5" x 1.5". This scale worked for my project.
8 dowel screws
wood putty
paint
liquid sanding/ deglosser- I clean the table with this type product for better paint adhesion
Hack saw
drill and drill bits
locking pliers- plain pliers might work, but locking pliers make the work easier
pencil
ruler
straight-edge

EXTRAS:
tracing paper
gold paint
circular saw
painters tape

Leaf pattern for the top of the table.